date of publication：2019-8-29 15:04:36 publisher：anshan libang compressor co., ltd.
filter product introduction
c-main line filter
it can remove a large amount of liquid and solid particles above 3 µ m, achieve low residual oil content of only 5ppm, and have a small amount of water, dust and oil mist, which is used for general protection after air compressor, rear cooler and other filters; before being used in the cold dryer, it is used as a pretreatment device.
t-air line filter
it can filter out liquid and solid particles as small as 1 µ m, achieve low residual oil content of only 0.5ppm, and there is trace moisture, dust and oil mist. it is used for pretreatment before class a filter; after the cold dryer and suction dryer, the air quality is further improved.
a-ultra high efficiency oil removal filter
it can filter out liquid and solid particles as small as 0.01 µ m to achieve a low residual oil content of only 0.0001ppm. almost all moisture, dust and oil mist are removed. it plays a protective role before being used for class h filtration and suction dryer. after the cold dryer, it ensures that there is no oil in the air.
h-activated carbon micro oil mist filter
it can filter oil mist and hydrocarbons as small as 0.01 µ m to achieve low residual oil content of only 0.003ppm, free of moisture, dust and oil, odorless and tasteless. it plays the role of the last filter for some units that must use high-quality air, such as food industry, respiration, sterile packaging, etc.
technical specification table for high efficiency filters
|
model
|
nominal flow
nm3/min
|
size
|
access interface
|
|
a
|
b
|
c
|
|
lbg-1.0
|
1
|
115
|
290
|
550
|
1″internal tooth
|
|
lbg-2.0
|
2
|
130
|
575
|
835
|
1″internal tooth
|
|
lbg-3.0
|
3
|
130
|
575
|
835
|
11/2″internal tooth
|
|
lbg-6.0
|
6
|
130
|
735
|
995
|
2″internal tooth
|
|
lbg-10
|
10
|
159
|
360
|
1140
|
2″internal tooth
|
|
lbg-15
|
15
|
159
|
360
|
1140
|
21/2″internal tooth
|
|
lbg-20
|
20
|
159
|
360
|
1140
|
dn65
|
performance of filter material
|
filter element grade
|
main filter material
|
working pressure mpa
|
working temperature ℃
|
filtration accuracy µm
|
liquid water removal rate ﹪
|
residual oil
|
peculiar smell
|
failure pressure drop mpa
|
hourly life h
|
|
v-class prefilter
|
stainless steel mesh and glass fiber
|
0.2—1.4
|
≤65
|
3
|
99
|
60﹪
|
yes
|
0.07
|
8000
|
|
z-class fine filter
|
multilayer glass fiber
|
1
|
100
|
30﹪
|
yes
|
|
x-class ultra-precision filter
|
multilayer glass fiber and sponge
|
0.01
|
100
|
0.01ppm
|
yes
|
2500
|
|
class a activated carbon filter
|
activated carbon and glass fiber sponge
|
0.01
|
100
|
0.01ppm
|
nothing
|